12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

heating problems

Thread Tools
 
Search this Thread
 
  #1  
Old 10-06-2010, 06:18 AM
BAD ASS RAM's Avatar
Diesel Wrench
Thread Starter
Join Date: Mar 2009
Location: clifton,tn
Posts: 592
Received 5 Likes on 5 Posts
Default heating problems

ok,having problems,truck heater went out last night and this morning i was gonna pour some water in it and the blackest thickest crap i've ever seen came out of the cap.i came on in to work and it ran hot on me,and when i popped the hood there was steam coming from what looked like the bottom of the motor or somewhere around the floor board,what's goin on?
 

Last edited by BAD ASS RAM; 10-06-2010 at 08:57 AM.
  #2  
Old 10-06-2010, 05:45 PM
monster12valve's Avatar
Diesel Bomber
Join Date: Sep 2009
Location: willowick, ohio
Posts: 1,355
Received 47 Likes on 44 Posts
Default

heater core? is there antifreeze in the oil? any antifreeze on the ground?

---AutoMerged DoublePost---

oil cooler maybe?
 

Last edited by monster12valve; 10-06-2010 at 05:45 PM. Reason: Automerged Doublepost
  #3  
Old 10-06-2010, 07:56 PM
jrad989's Avatar
Diesel Enthusiast
Join Date: Jul 2009
Location: Canby, Oregon
Posts: 355
Received 22 Likes on 13 Posts
Default

you blew a head gasket.
 
  #4  
Old 10-06-2010, 08:14 PM
392hemix's Avatar
Diesel Wrench
Join Date: Feb 2009
Location: New Hampshire
Posts: 528
Received 10 Likes on 10 Posts
Default

not good...1200 bucks should get you a new head gasket and studs installed. id lower that timming, unless you wanna get o-ringed head...22* is high. i have mine set@ 16.75* so it satarts easy in the cold weather and i dont blow my head gasket. but im sure its a matter of time. good luck with it hope thats all it is and nothingmore serous
 
  #5  
Old 10-06-2010, 10:34 PM
tiremann9669's Avatar
Diesel Bomber
Join Date: Mar 2010
Location: Dansville NY
Posts: 4,233
Received 434 Likes on 356 Posts
Default

Floor board, I'm thinkin heater core
 
  #6  
Old 10-07-2010, 12:28 AM
blazier18's Avatar
Diesel Bomber
Join Date: Jul 2010
Location: knox county tn
Posts: 1,176
Received 28 Likes on 28 Posts
Default

it could be either or. is there any oil in ur antifreeze? is ur heater blowin at all is it cold if it does. mine done two different things when my head gasket went out.
 
  #7  
Old 10-15-2010, 04:13 PM
v8440's Avatar
Diesel Fan
Join Date: Oct 2010
Posts: 47
Likes: 0
Received 4 Likes on 4 Posts
Default

Could also be the transmission cooler failed. They're an oil-to-water cooler, and all sorts of nasty things can happen if they start allowing the two fluids to mix. It's a horizontal metal tank looking thing on the passenger side of the engine, towards the back, under the turbo/manifold.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tom88k5
12 Valve 2nd Gen Dodge Cummins 94-98
2
06-16-2015 12:57 PM
J. Nick
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
04-24-2015 01:13 PM
moroza
Diesel In Distress - Support Ticket
0
03-29-2015 05:37 PM
Zachbishop
5.9 Liter CR Dodge Cummins 03-07
3
02-10-2015 10:23 AM
ChgoSquad5
Ford Powerstroke 2011-Up 6.7L
2
01-06-2015 11:37 PM



Quick Reply: heating problems



All times are GMT -5. The time now is 09:27 AM.