Diesel Bombers - 60lb valve springs install

Diesel Bombers (https://www.dieselbombers.com/)

- 12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)

- - 60lb valve springs install (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/58176-60lb-valve-springs-install.html)

posmx

09-07-2010 12:39 AM

60lb valve springs install

is this something i can do myself or am i better off with a shop? if i can anyone have directions? thanks

jrad989

09-07-2010 01:04 AM

valve spring compressor and some patience on the back ones. you can do it!

big bad diesel 416

09-07-2010 01:45 AM

Quote:

Originally Posted by posmx (Post 616996)

is this something i can do myself or am i better off with a shop? if i can anyone have directions? thanks

its cake man put the hole you wish to work on on TDC (you can tell because the rockers will be loose) go get a spring compressor and bam your done oh and DONT drop the retainers use a good magnet if they go down the pushrod holes or into the cylinder you got a tone of work now

cummins95

09-07-2010 09:24 PM

do u have to pull the head to do it?

big bad diesel 416

09-07-2010 09:44 PM

Re: 60lb valve springs install

Nope

Sent from my DROIDX using Tapatalk

94 12valve

09-07-2010 09:59 PM

just take you time and make sure the retainer is in before you let the compression off the spring ... if not you will be looking for the retainer after you send it flying

All times are GMT -5. The time now is 08:56 AM.