4x4 issue please help!!!
i went to put my truck in 4x4 to pull my boat outta the water and it would not go in. it is a floor shifter. i pulled it and it feels like it goes in but the axle dosent actuate. same in 4 low. is it the actuator? im thinkin that or vac leak? any ideas? thanks in advance guys.:c:
|
Check your vac lines all the way to your axle and if your getting vac then yes it is your actuator get rid of that and get posi lock cable and put in tons better and dont have to worry about it failing
|
good advice! thanks blackcloud! didnt even think of the posi lock cable!:c:
|
if you think its a vac problem does you a/c blow only out the defrost
|
Originally Posted by 12vcummins96
(Post 613691)
if you think its a vac problem does you a/c blow only out the defrost
|
yes it only blows out of the defrost!!! and the breaks suck lately to!?
---AutoMerged DoublePost--- looks like i am hunting for a vacume leak... any popular places to start my search? my brakes have been messed up to... seems like it may b the pump?:argh: ---AutoMerged DoublePost--- also the steering gear box just started leaking to... could that have somthing to do with it? |
Originally Posted by monster12valve
(Post 614682)
yes it only blows out of the defrost!!! and the breaks suck lately to!?
---AutoMerged DoublePost--- looks like i am hunting for a vacume leak... any popular places to start my search? my brakes have been messed up to... seems like it may b the pump?:argh: ---AutoMerged DoublePost--- also the steering gear box just started leaking to... could that have somthing to do with it? |
i checked the big line going to the booster.... it was swollen so i replaced but it didnt make a diff. so i will continue my search 2maro.
|
check the line on the axle for the CAD
|
Originally Posted by monster12valve
(Post 615268)
i checked the big line going to the booster.... it was swollen so i replaced but it didnt make a diff. so i will continue my search 2maro.
|
My line came out at the vacuum pump that goes to the main vac. line at the firewall. And buddy it affected everythang! no 4x4, you only have 1fan speed, how the truck ran and a few other thangs. I was getting ready to pull my hair out but i finally found it!
|
Fixed!! thats everybody for all the help! it was a small black plastic vac line that went of the motor and throught the firewall. it had a rubber cuppler from were it looks like it broke before. so i ran a new line.... good as new! thanks again guys really appreciate all the help:c:
|
All times are GMT -5. The time now is 10:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands