How to remove cam (part way)
7 Attachment(s)
As always ~ SAFETY FIRST!!
- Disconnect the Negative cable of your battery system. - Chock the wheels and set the parking brake. - Have a known good fire extinguisher close by. - Have good lighting. - Have a clean and orderly work area. - Always exercise good working practice with your tools. - Use safety goggles, gloves, masks, etc where appropriate. Remove the dampner Attachment 45718 Remove the bolts in gear cover and remove the gear case (note blown seal) Attachment 45719 Remove the tap-it cover Attachment 45720 align the timing markes Attachment 45721 Attachment 45722 Remove the cam retainer bolts Attachment 45723 This is a hard part you have to hold up the tap-its I used a pare of plyers and pulled each one while putting psi on the cam Attachment 45724 Rotate and remove the cam tap-it by tap-it and set on floor (standing up an tie to something so it wont fall over) (More to come) |
All times are GMT -5. The time now is 10:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands