fuel screw help
 

howdy,my friend just got a 95 12 valve can you guys tell us were the fuel screw is(pictures work better)and how far do you turn it?I know you guys have all done this a million times,so let us know what we need to.thanks.:tu:

Check the forum, there are some really informative discussions that'll answer all your questions....and then some... Happy Hunting!!!

ok thanks for replying so quickly,i will check it out.happy huntin yourself.:c:

its under the afc housing on the back of the ip~!

I am new to this site and have red a lot of post about turning the pump up and most everyone says don't do it unless you have a pyro gauge a few clicks im sure isnt bad but i turned mine back until i get a pyro.

Best to get a egt(pyro) guage first.When you start turning up the fueling, the egt's start going up.
Also ask your friend if the kdp has been dealt with.

i turned mine up alot with 4'' exhaust never had it get hot on me and i pull 9000 lbs trailer from mi to ky every week 70 mph

lol good for u you turned it up alot huh if so it should be climbing on at least on a bog!!