12 valve manifold fits what years ?
i have a 94 12 valve im building and it didnt come with an exhaust manifold ...i got my hands on a stock 89 -93 manifold ....just woundering if there is any difference
i know an aftermarket would be the way to go but funds are low... |
i think all the 12v are the same, the 24v will bolt up but the holes are more round as the 12vs are sqaure so some mod. would have to be made to make the 24 work on a 12
|
i dont know if theyre the exact same, but a 94-98 12v manifold dropped right on my 93, which had an 89-93 manifold before so theyre at least close enough to work
|
there the same :tu:
|
Originally Posted by biged681985
(Post 575928)
there the same :tu:
|
cool.. thanks guys..i knew it would bolt up..was just woundering if there were any differences...i aso have a spare 24v manifold maybe ill look into modding ..it looks like it flows alot better
|
the 24v one will take alot of porting to get it lined up correctly. then with the extra materia removed, it will make the manifold even more prone to cracking. imo, id stick with just the 12v manifold. im running a 1st gen manifold on my 2nd gen 12v, bolted rightup no problem :tu:
|
yea bro looks like your right ....i eyed it up yesterday and the 24v manifold would definitly wind up being to thin to seal and prob. would crack ...guess im going with the 1st gen.
|
All times are GMT -5. The time now is 02:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands