im swappping out bumpers anyway, thats why im taking it off. what was the easiest way to remove the spot welds

i went to harbor freight and bought a spot weld cutter. it goes on your drill and drills them out in half the time a drill bit would take. it was $6.00. also it is alot cleaner looking then using a drill bit.

---AutoMerged DoublePost---

any sears or tractor supply would have them also.

I used a chisel on an air hammer.....zipped em right off. The hammer and dolly straightened out anything from the chisel and a few spot welds with the mig and you're back in business.

sweet. any other tips? just remove the plstic wheel well cover and get the rest of the bolts out? and remove the spot welds