Diesel Bombers - Where do these go??

Diesel Bombers (https://www.dieselbombers.com/)

- 12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)

- - Where do these go?? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/46483-where-do-these-go.html)

Rexy	03-16-2010 07:25 PM

Where do these go??

2 Attachment(s)

Attachment 14502

Attachment 14503

This came in the Timing cover gasket kit from O'Reillys' wondering where these other 2 pieces go.
Thanks

:argh:

wes-cummins

03-16-2010 07:37 PM

one should be a crand seal, one might be the oil fill seal

12valvetater

03-16-2010 08:20 PM

Crank and oil fill

Rexy	03-16-2010 08:29 PM

I have already put the new crank seal in. In the pic, does the top left rubber seal go in the oil fill? The top right is all metal.

Overmodified

03-16-2010 09:26 PM

Mine dosn't have the black circle just the tin peice the seal and that plastic sleeve that is in the seal. I think the tin part goes on the outside closest to the balencer?????

hdsidehack

03-16-2010 09:45 PM

the tin thing is the installation tool for the seal

Rexy	03-16-2010 11:30 PM

I was hoping the metal piece was for installation, cause thats what I used it for!! Still not sure on the black rubber piece. :humm:

---AutoMerged DoublePost---

Do you leave the seal flush with the front of the cover, or put it in as far as the installation piece will let you? about 1/4 inch?

All times are GMT -5. The time now is 07:08 PM.