Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   injector leak?...maybe? (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/43220-injector-leak-maybe.html)

brindle_bull 02-12-2010 12:02 AM

injector leak?...maybe?
 
hey guys ..it all started when i notice some fresh oil around the valve cover gasket on number 3 of my newtome 95 auto 3/4 cummins. then i heard a very faint hiss hiss hiss sound over the loud engine noise and i think it might be coming from injector 4 or 5. so heres my question, is it possible for an injector to leak a little air by and still work cuz the truck runs like a champ....and if so can a guy fix that problem without buying a new set of injectors? ....if ya'll dont think its an injector could it be hissing from possibly the valve cover gasket leaking area?

coyropin 02-12-2010 12:05 AM

yeah it could be the injector hold down is loose might beable to retighen them down i would change out the copper seal too

ArizonaRedneck 02-12-2010 12:06 AM

:humm::humm::humm:

94 12valve 02-12-2010 11:17 AM

Sounds like you need a new set of valve cover gaskets. The hiss you hear could also be an exhaust leak there is a gasket right by the injectors.

If it were an injector it should be leaking fuel not oil and it would not run like a champ.

brindle_bull 02-12-2010 01:33 PM


Originally Posted by 94 12valve (Post 493149)
Sounds like you need a new set of valve cover gaskets. The hiss you hear could also be an exhaust leak there is a gasket right by the injectors.

If it were an injector it should be leaking fuel not oil and it would not run like a champ.

this is what i was leaning towards...the hissing is very very faint i wouldnt have even heard it if i hadnt clean my ears out that morning haha i guess gaskets are cheap enough so i will replace em and see where that gets me.

PhilipR 02-12-2010 02:09 PM

Could the breather be plugged up and it pushed the V/C gasket out right there as the pressure found the easiest spot to go?

94 12valve 02-12-2010 03:00 PM


Originally Posted by Dusterb318 (Post 493262)
Could the breather be plugged up and it pushed the V/C gasket out right there as the pressure found the easiest spot to go?

Thats a good point.

If it had an exhaust leak it would be able to hear it pretty easy, I would start where Dusterb318 said

powermad 02-19-2010 03:50 AM

does the hiss match rpms?


All times are GMT -5. The time now is 11:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands