injection pump issue
 

i have a 98 ram 3500 4x4 5 speed. i bought it from an old guy and he turned the pump down to try to get better fuel economy. i was told to turn the fuel screw or smoke screw on the back of the injection pump. im not sure wat that is or which way to turn it. anyone have pictures for the retard with my first diesel. anything will help.

:hellox:welcome to the site, im sure whatever you need.. dieselbombers can help!!! turn the screw towards the motor !!!! good luck

which screw is it the actual afc or wat

Its on the back of the pump towards the top.

thanks im gonna see wat i can do. thanks for the help

---AutoMerged DoublePost---

ok im lookin at the p pump and above the afc is a screw with a slot cut in it and has wat looks like a home made cotter pin is that the right one

There are 2 screws that hold the cap on to get to the smoke screw the slotted one and a breakoff screw. Look here for more info https://www.dieselbombers.com/5-9l-1...ning-mods.html

take off the afc and slide the factory plate forward.

Only if he has a pyrometer.

yeah i aint sliding the plate forward. im waitin for my gauges and my new #10 plate

The smoke screw is the one on the back of the AFC near the middle of the housing, running parallel with the motor.