Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   94 AUTO towing problems (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/36540-94-auto-towing-problems.html)

jstizy 11-18-2009 06:47 PM

94 AUTO towing problems
 
i was towing a buddy's skid loader up a slight hill today and "almost" didnt make it bc the pedal was to the floor and i was only hitting 20 mph. I was monitoring the gauges and the boost was reading 26 lbs, rpm's were around 2,400 and the weird thing was that my egt's were only at 600? the question is... Is it time for a transmission upgrade or am i not getting enough fuel bc my egt's were so low?

lodal cummins 11-18-2009 08:25 PM

i would say not enough fuel with egt's that low pulling a skid loader. stock fuel plate= no fuel!!!!! pull the tranny dip stick and see if it smells like burnt toast.

Shea@L&N Performance 11-18-2009 09:39 PM

Sorry to say it but it sounds like it might be time for a new tranny

jstizy 11-19-2009 06:15 AM


Originally Posted by lodal cummins (Post 434623)
i would say not enough fuel with egt's that low pulling a skid loader. stock fuel plate= no fuel!!!!! pull the tranny dip stick and see if it smells like burnt toast.

i pulled the tranny dipstick and it was red but didn't smell it. i was told if your tranny is going out it will be a brownish color.

---AutoMerged DoublePost---


Originally Posted by Shea@L&N Performance (Post 434680)
Sorry to say it but it sounds like it might be time for a new tranny

for the hauling i do and the slight mods i have would a BD Diesel Stage 3 kit be good enough? I'd like to put bigger injectors and an aftermarket fuel plate in also.

Shea@L&N Performance 11-19-2009 09:08 AM

Your torque converter might be slipping, kinda sounds like what is going on. I would go ahead and get a tc and a valvebody, those should drastically improve your tranny, and if you add alot more power you'll just need to get a heavy duty rebuild kit and maybe a billet input. I just got my tripple disc tc and valvebody from suncoast yesterday for my 97, hope to get it in over the weekend or first of next week so Ill keep you posted on how she holds up. Were going to have a huge sale on Suncoast parts the friday after thanksgiving so if your interested in that, just let me know.:tu:

Uncle Bubba 11-19-2009 12:57 PM

Floored, 20 mph and the tranny fluid isn't burnt to ash. You got a problem here. That truck should have pulled that thing with out even breathin hard and with that description your EGT's should have melted that engine long before you came to a stop.

I don't know anything about the fueling on these 12V trucks but you a fuel problem there.

Shea@L&N Performance 11-19-2009 01:52 PM

Missed the EGT part, that does seem kind of odd. Does sound like a fueling problem.

BAD ASS RAM 11-19-2009 02:33 PM

how is 600* gonna melt his engine?

jstizy 11-19-2009 02:52 PM


Originally Posted by Uncle Bubba (Post 434985)
Floored, 20 mph and the tranny fluid isn't burnt to ash. You got a problem here. That truck should have pulled that thing with out even breathin hard and with that description your EGT's should have melted that engine long before you came to a stop.

I don't know anything about the fueling on these 12V trucks but you a fuel problem there.

if does sound like a fuel problem but i dont know where to begin because in the last two months i replaced the fuel filter, cleaned the pre-filter, replaced the lift pump and replaced the overflow valve... any ideas? on a side note i am going to go ahead with the upgraded tranny mods and TC.

lunk 11-19-2009 04:08 PM

get a fuel pressure gauge on it


All times are GMT -5. The time now is 11:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands