wat are the temps.
 

for the gauge when the pyro is post turbo?

Should be around 300-400 at idle and 650-800 cruising speed

so not above 800? wat about boost? wat should the psi should be when crusin?

At cruising speed for me,60/70mph.I am usually between 5/10psi.

the probe is after the turbo not before those numbers are to much

wat are they then?

im running around 900-1000 deg. pre turbo at crusing speeds 60-65 mph

is after the turbo accurate? even if you make more boost by blockin the waste gate?

i prefer to know wht mu #'s are gong into the turbo becasue there closer to the pistons. aluminum melts about 1200-1300* and that is what your pistons are made of. at idle im at 300-400 and cruising empty 800-900, going up a pass with 6k on the back going 70 im about 1150* pre turbo is way more accurate but its alot harder to mount the probe, just figure what every yours says you are reall 400* more than what it is telling you

ok thanks brandon. yeah thats where he put it i would of put it in the manifold