100+ with the trailer on.

That must be nice. I hope your probe is in the right spot, a lot of people around here do it after turbo because the probe might break off and mess up youre turbo but i just tell them thats not a good idea because its not a true reading it can be off by as much as 400 degrees and I have never heard of that problem with the probe breaking off. I dont know what to say to that.

What rpm are u at goin 95?

I Have it pre turbo 2" from the turbo flange and 5/8 from the center. closer to cab. it is in the correct spot. i wanted it to be spot on because i don't want to burn out a piston. I would rather the probe break off and destroy the turbo then burn up my engine. the truck is @ 2800 rpm @95mph maybe 2900 but it never has hit 3000rpm out of over drive.

I would say im at about 2900 Rpm at 95. To tell you the truth i wasnt paying attention to my tack when i hit 110 i was racing some damn intrepid or something like that i was just trying to get past them because we were on a highway and were coming up to a hill.

---AutoMerged DoublePost---

At least the tag on my truck says 4.10 gears, but the rear diff has been opened up before, they left a nice coating of silicone to see. My truck might have different rear gears which would be retarded to change the rear end gears and not the front but stranger things have happened. Because when im in 4WD I can drift the back end pretty easily in the snow, it seems to break loose before the front tires will. Does anyone else have that problem in 4wd?

I would guess that if you had diff gears in the rear then the front you would blow your transfer case in less than a mile. even if it was a tooth off. so if you use it and it doesnt blow your prob ok. Post a new thread about it.

---AutoMerged DoublePost---

I dont go on the 24valve threads and make fun of the vp44 pussy pumps LOL:fu1: 12valves of fury baby!

:U:lol lol lol All in fun Dude. I do want to see you reach your goals tho. I'll try to help or find some one that can:U::c:

I'VE ALWAYS HEARD THAT THE CASE AND DIFF'S COULD TAKE A 20% OR 30% DIFFERENCE IN RATIO,BUT PROBABLY NOT A GOOD IDEA

got it to go 110 with the 100 plate and still had more to goooooooo. But i was a little scared because the boost was going threw the roof. i was going slow with the throttle watching my gauge and once hit it 30psi i was backing off but saw how fast i was going and hit the throttle, my gauge hit @110 and i back out as fast as i could. but 110 is a nice top speed way better than 95, but now i am hungry for more speed and more upgrades.....:U:

So you could slowly climb to that point but not if you try to do it fast? If thats the case I would say FP is too low up high.