Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   Max Boost on stock 96 12v turbo (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/23648-max-boost-stock-96-12v-turbo.html)

jumpnjed 03-12-2009 09:44 AM

Max Boost on stock 96 12v turbo
 
Ive been looking around the site and havent really found the exact answer. I was wandering what is the max boost you can obtain from the stock turbo. I have a boost elbow, plate all the way forward and the star wheel all the way forward. I have plans for injectors lata on. I want good dependable power without hurting parts. So how much boost is acceptable without breaking stuff....????

HAYMAFIA 03-12-2009 09:59 AM

guessing around 35 pounds, mine will boost 38, but on another truck I had it hit 42 and broke the shaft:argh:

jumpnjed 03-12-2009 10:02 AM

I just bought a isspro 40psi boost gauge... I figured i wasnt gonna reach higher than that on a stock turbo.. but if i do ill buy another

xzaq103 03-12-2009 10:20 AM

40psi... but past 35 all its makeing is heat.

jumpnjed 03-12-2009 10:33 AM

So where should i keep it to maintain reliability and performance?

94cummins12v 03-12-2009 10:34 AM

30-33 psi is the most sufficent are before creating heat

ykdave 03-12-2009 11:24 AM

in the low 30s is great, 35psi is getting borderline, anything higher and you are getting out of the compressors efficiency range and its super heating the air and really putting a strain on it.

jumpnjed 03-12-2009 12:51 PM

on the boost elbow, does screwing the set screw in or out increase the boost... And how does it increase or decrease the boost?????:humm::humm:

ykdave 03-12-2009 02:47 PM

screwing it in increases boost because it lowers or cuts off the boost signal to the wastegate. some of the ebay boost controllers work similar too, except they just vent the wastegate line to lower the pressure signal to the WG

Beets 03-12-2009 07:26 PM

mid 30s is idea for that turbo even though i have seen 60lbs out of a hx35 you are just doing more harm then good at that pressure. i have watched my gauge hit 53 and i was listings for the turbo to break the shaft or explode.


All times are GMT -5. The time now is 01:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands