I have the quickserve user name and password for cummins. Their site is kind of hard to find specs but if you let me know what you need I can find it for you.

 

if you can find a list of ground to top specs that would be great

 

again... the cummins manual does not list top to bottom specs....

The specs are in each section for each part, kind of stupid, but thats the way it is.

If you need to know a torque just post what specific part(s) you need to know and then we can go from there

 

i got the pistons in and torqued does for the rods 45lbs+65* sound correct?

 

22 ft-lbs, 44ft-lbs, turn 60* connecting rod cap screws
44ft-lbs, 60ft-lbs, turn 90* main bearing cap screws (i'm assuming you are reusing your old bolts over again) tighten in sequence starting at the center and working out ward finishing at the front of the engine

hope this helps if you need any more just ask

 

no i ended up getting new bolts thanks for the info everything is already in i just wnted to double check

 

what did you torque the new bolts to?

 

45lbs then 65* aditional and 129 with the mains is what cummid northwest said

 

sounds good hows the motor coming? when are you going to be out on the road jamin gears again?

 

im hoping to have her in break in period saturday morning

Tursday- finish block up
wednesday- install cam and mount in truck
friday night- install head, all external components, new custom made twin ram intake, relocate fuel filter
saturdy- start the beast