Looking For Some Stick Ideas
i have a 2001 ford superduty
i have a 12v with a 62 14 htb2 a 180 pump with a 3000k gsk now i have marine injectors from piers truck has a brand new set of mahle .050 pistons and a fresh set of bearings in it [had a oil cooler go out and kill my 53 block ] so i replaced it with a 55 from a 02 had head shaved and a 5 angle valve job and hd valve springs installed now for the injectors i havent seen many choices for a 12v i want to go as agressive as my prev mods will let me... |
arent those marine injectors good enough for right now? how big are they
|
marine injectors dont match the cup of the piston very well the make a lot of smoke and a lot of heat i should have put marine pistons in for a better match
just looking for a real good 12v injector hopefully i can get toward 500hp out of this |
Have a look at DDP. I've heard nothing but good about them.
If you're local here, you can get them from Harry. |
hey i thought that the 53 block was only with the 24 valves?:humm:
|
Originally Posted by youngcummins
(Post 191221)
hey i thought that the 53 block was only with the 24 valves?:humm:
|
All times are GMT -5. The time now is 12:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands