Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   No Charging system, no tach, no wait to start (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/132369-no-charging-system-no-tach-no-wait-start.html)

Andyhc1 12-29-2016 09:40 PM

No Charging system, no tach, no wait to start
 
Ive been chasing this problem for months now. No charging system, no tach, no wait to start, no speedo and about out of money lol. Ive replaced cps, batteries, alternator, pcm, and chased down seems like 1000 wires. And advice will be greatly appreciated im out if ideas. :argh:

Diesel.121 12-30-2016 09:03 AM

Have you tried driving it since this started or has it been parked? Is it an automatic or manual transmission?

Andyhc1 12-30-2016 09:50 AM

Ive driven it 2 or 3 times since it started all this ( enough to drain the batteries) . And its a manual transmission

Mahir Sa'id 04-14-2017 10:58 PM

im having the same problem it would be nice for someone to help us out

JBearSVT 04-15-2017 05:18 AM

Dash harness

Andyhc1 04-16-2017 09:48 PM

Figured it out
 
I actually figured it out a couple months ago. A wire had gotten pushed out of the back of the fuse panel goin to the main "engine" fuse or somethin like that. Kinda feel like a D.A for not finding it before i put all that money in it, but hey live and you learn right?

JBearSVT 04-17-2017 04:51 AM

Seriously? How the...? Hm. Interesting.

Andyhc1 04-19-2017 08:08 PM

I had installed an airdog and it runs into the fuse block. I guess when i hooked it up the first time i pushed the wire out. Kind of a one in a million thing i guess

JBearSVT 04-20-2017 04:48 AM

Yeah, I'd never heard of that before. One more for the lists.

Here4thecake 05-22-2017 10:56 AM

I have bun chasing this same issue for a week. Same symptoms: no tach, a/c, O/D or torque lock up, alt isn't charging. I first swapped out the Ess. With proper gapping it still hasn't fixed the problem. I started chasing other sensors and found my tps had some torn wires at the connector. Replaced that with no luck. I am receiving signal and power at both sensors 8.8 and 3.8 respectively. I have also been checking grounds and continuity wherever I can. Does anyone have any advise!? I'm a patient person but this is getting old. Would the PCM be bad and still be sending power and signal?


All times are GMT -5. The time now is 04:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands