best injector?
Ok I got a a 97 with 4k GSK , 024 delivery valves, air dog 150, port and polish on exhaust side, steed speed manifold, with 62 mm over 75mm compound setup with fire ring and headstuds and I was wondering what you think would be the best injector for this setup? I'm running a 7X.014 but I see a lot of people are running 5.???. I got 5 inch exhaust pusher intake, with water - method injection . What are your guys input? Thanks for the input!!!
|
Leave it. Unless for some reasons you think it's under performing. Most just don't buy into the extra hole hype as I don't think there's enough proof of an improvement and the extra potential risk of the tip cracking. But Id leave them. 7x 14 is fairly large so you should be good.
|
Thanks a lot
I don't think bad about them but everybody I talk to think they are WAY to big. I mean even at 60 lbs of boost they put out a little smoke but they seem to think I would be better off putting my 5X0.12 back in it. Just wanted to throw it out there to see what other people thought.
Thanks again for your input! |
They are fairly large. Probably close to a 5x18 equivalent but I mean if they are super dirty I wouldn't bother. 5x12 is a tad small for a compound set up. 5x14 or 5x16 would be more ideal. I persoanally wouldn't waste the time and money/ effort. If afc live isn't something you have you may want to consider it to help tune it better. I'm not a expert on compound set ups but 60 psi seems a tad low to me for a compound set up. I could be wrong tho.
|
7x.014 are closer to 5x.016 or 5x.018. Doing AFC live or Attitude adjuster would be nice for tuning.
|
Best injector
Originally Posted by wpg6.5
(Post 1105444)
They are fairly large. Probably close to a 5x18 equivalent but I mean if they are super dirty I wouldn't bother. 5x12 is a tad small for a compound set up. 5x14 or 5x16 would be more ideal. I persoanally wouldn't waste the time and money/ effort. If afc live isn't something you have you may want to consider it to help tune it better. I'm not a expert on compound set ups but 60 psi seems a tad low to me for a compound set up. I could be wrong tho.
|
All times are GMT -5. The time now is 04:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands