Rpms getting stuck...!
Just installed the 4ks and 60lb valve springs after starting the truck up the idle was super low adjusted the idle and now when I roll through the gears and stab it the rpms will get stuck at 3800 rpms I have to tap the gas again for it to come back down.? Any help thanks guys
|
They sometimes start to still cause linkage on pump gets slop in it i usually put extra return spring on it
|
Originally Posted by Kbnecessary
(Post 1088211)
They sometimes start to still cause linkage on pump gets slop in it i usually put extra return spring on it
|
So did that work for u
|
All times are GMT -5. The time now is 08:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands