Straight pipe help
 

I need some information on straight piping my 12 valve cummins. I don't really know how to put my questions into words so heres my best!

When straight piping the truck, when the exhaust comes down into the cat/muffler, can i put an adapter for a 3" pipe to a 4" pipe then just have a whole new pipe running from the adapter to the end?

get on Ebay and look up a 97 dodge exhaust ... I bouthg a dimond eye 5" aluminized .. sounds freeking awesome and looks nice too .. picked it up for 369.00 ... fit like a glove

highley recommend the Dimond eye stuff ..

We can beat eBay deals

Luke

If your asking if you can cut out the cat, then put to 3 tapperd up to a 4 inch pipe then just run 4 inch all the way back then yes you can i have mine like that now till i can get a 4 inch downpipe

4" straight through
 

Hi,
If you start to piece together components of the exhaust then it will be hard for you to locate parts that will fit correctly.
It is best to just get a 4" straight through turbo back exhaust.
The kit will come with everything you need to get the job done.
Please feel free to give me a call if you need more information.
Thanks,
Dave

ive done all my exhaust so far from the downpipe to 2 5" stacks so far its cost about 100 bucks

i did my exhaust on my 97. i got the 4 in. down pipe and 3 in.- 4 in. weld on flange from source automotive, 1 stick of 4 in. pipe from a local muffler shop, and found an old 4 in. stack off a semi to use to make my 90. i reused all the factory hangers and it exits like the factory exhaust did, only rolled slightly down. All together i have about $250 in it not counting my time. if you can weld you can build your own reasonably cheap.