no pedal after certain load 96 12v
 

my 1996 12valve has been running fine but when i get to a certain speed or rpm i push the pedal and it does nothing almost seems like it bogs down a little bit can anybody help ?

Have you checked the external throttle linkage and cable? Are you located in a cold climate currently?

Sent from my SCH-I605 using Tapatalk 2

Checked tge throttle she feels good and it's chilly around here 50-20s

What rpm are you at when it does this and when is the last time you changed your fuel filter?

sounds like the cable is jaming up in the cover ... :humm:

Hmm what could I do to fix that I don't think wd40 will get me outta this one

---AutoMerged DoublePost---

It's around 2 grand and I'm going to change the filter today

I would make sure that the linkage is getting the full throttle ... you may end up needing a new cable ... but verify that you able to get WOT first .... have someone in truck push slowly to floor ... look for jaming or obstructions ... If you see none ... buy new cable and should eb good to go .


they usually come apart inside the cable sheeth ...:ouch:

If it still has stock governor springs at 2000 rpm I wouldn't think it would have a lot left to give and that might be why it feels like it is bogging down maybe someone else will have a different opinion

X2

Sent from my SCH-I605 using Tapatalk 2

Just got done having this same EXACT problem,fuel filter was the culprit,but could also be low fuel pressure to the injection pump:rocking: