Torque converter will not lock tried everything please help
1997 3500 12v 168k automatic
The torque converter will not lock. Does go into o/d however I've tried: Adjusted tps to 1.0-1.1v Adjusted tv cable Checked ground at tps works Checked brake switch Checked throttle rod at 5" Checked AC current at alternator (0volts) Checked trans relay Code 1224, not sure what to do What else is there to check?!? Please help this is my dd for towing cars ---AutoMerged DoublePost--- Tried a lock up switch and still nothing Any input |
Originally Posted by ebarresi5894
(Post 1037290)
1997 3500 12v 168k automatic
The torque converter will not lock. Does go into o/d however I've tried: Adjusted tps to 1.0-1.1v Adjusted tv cable Checked ground at tps works Checked brake switch Checked throttle rod at 5" Checked AC current at alternator (0volts) Checked trans relay Code 1224, not sure what to do What else is there to check?!? Please help this is my dd for towing cars ---AutoMerged DoublePost--- Tried a lock up switch and still nothing Any input Sent from my SCH-I605 using Tapatalk 2 |
sounds like the clutch has let go ... what is the state of your trans fluid ? ... smell burnt ?
might try and just drop pan, install new filter and re-fill ... but I'm betting your TC is not good .... - (Common issue with any dodge ) .. even the newest ones |
All times are GMT -5. The time now is 06:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands