Putting a 727 in a 1994 2500 4x4
Needing some advice and help my 47rh is crapping out and having a hard time finding another one or a master rebuild kit. Was told I could use a 727 and it would bolt right in will it and what do I need to do
|
Finding another one might be hard, but you can find rebuild kits easy. Look on Ebay, it uses the same clutches as the 47re. I wouldn't put a 727 in there, these trucks need more gears, not less. What is your transmission doing?
|
yeah a 727 would be pointless ...:td:
|
It's slipping in fourth gear pulled the pan and there was clutch material in the pan
|
its not too much more difficult than building 727 ... just don't attempt to pull the OD apart .... 800# spring will knock you on ur ass :ouch:
the forward half is easy ... buy a master kit , build the front half your self, have a local shop do the OD, and stuff it back in ... set ur line pressures around 175 and you should be happy .... and it will last :tu: |
All times are GMT -5. The time now is 05:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands