injector nozzle quesion
 

i was on diesel tuff looking around for my next mod and i came across some nozzles that say 140hp nozzles EDM. for 300 bucks. what is the actual horse power gain from these roughly, and is it worth it. i am going to eventully be getting bd super specail turbo 64/65/16 i think. and hamilton big stick cam. whats your opinion on these? part number is PH477-3 i found them about half way or more down the page

Injectors & Nozzles

I would buy the injector as a whole unit that way there balanced, popped, and modified the way they should be. The problem with just buying nozzles is when you put them in you should have the injector pop tested by a shop to make sure there all the same.

The super b special is a 64/71/14 good overall turbo, but for the money a good 63/68/.83t4 is hard to beat. that cam could be a few different grinds need to be more specific

Ok thanks ill just save for the hole deal probably cuz ipgettin tips and gettin pop tested is a lot of down time I think its a 181 210 cam if I remember right thanks for the input though

pretty good cam I ran one a few years ago and was happy with it good low end responce but chokes on the top end (round 3800 rpm)

We have similar sized injectors and nozzles for less and we are a site sponsor. I will send you a link