southbend, stock hydrolics
 

i have a south bend the guy said it was a stage 3 single disk, downfall hops pretty bad at take off not for a daily driver but it has stock clutch hydrolics. when im at a dead stop in take pretty long to put into gear to take off from a stop light, but shift just fine. the clutch predal does not need adjustment because it engages with pedal half way out, if i get the valair or southbend hd clutch hydrolics would this be fixed?

will not fix the hop issue or the putting it in gear issue ... easy fix for the gear issue is put it in 3rd than in 2nd. 3rd gear has a syncro 2nd does not

I sit possible that the clutch slipped alignment when it was installed? or the pivot bearing not in right?

Single disk clutches are going to have a rough engagement when they are rated for higher HP.

so what good does the hd hydrolics do since i have a hi end clutch and my stock hydrolics still seem to do nothin different then what the hd will do

they make driving a dual or tripple disk clutch much better