temp guage pegged at 230?
 

So I went to pull apart my dash in order to fix my 4 wheel drive light now I just have a new now I just have a new problem there was a wire or cable looking line behind the dash the only part that stays connected when you go to pull the dash out it seems as though there's a clip on there that broke I took a zip tie and got the part in the place it seemed to be originally except the temperature gaug which is pad tha at which is pegged at 230!!! I tried to mess with it some more but I had no luck idk if the cable has anything to do with it but it worked before and now I'm clue less any help would be great thanks

Come on guys I need some help here I can't get it figured out I checked my temp sending unit, and the board in the guage cluster both ok!?!?!

---AutoMerged DoublePost---

By the way this is a 98

so the light comes on and stays on all the time?

I bet your temp guage pegged at "WTFH!" is just because it's no longer grounded. find its ground and reconnect

No light comes on just the guage is pegged at hot I think it may be ground or the guage it self I'm guna install a mechanical guage better readung anyway and won't have this problem again