Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   lift pump (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/107747-lift-pump.html)

codycatract 01-12-2013 09:09 PM

lift pump
 
I have a 1998 12v 5 speed with 0 fuel plate intake exhaust and star wheel in a tad. Wide open after going through couple gears just gets gutless like lift pump can keep up. Some people say they don't do intank pump till 04, and also if I pump starter I should be able to here it run. I can and don't see it. When I go to part store and ask for 98 replacement pump its a tank one. And I look for a 97 one and its mechanical but don't know where it would be, like my old dodge it was mid block on back driver side any info? I don't wanna burn up injection pump

---AutoMerged DoublePost---

I plan on doing air dog eventually but I need replacement now who has done this before the truck was made in the end on 97 supposovly considered 1998

jake74 01-12-2013 10:12 PM

It should have a mechanical lift pump on drivers side of block,my 98 12 valve does.Should have 40-50 psi at wide open throttle.

codycatract 01-13-2013 07:35 PM

Found it. Kinda a bugger to see does around 25 psi at idle and around 40 psi at 2 grand no load sound good

turbo2332 01-13-2013 09:55 PM

sounds much better than normal. idle is fine but psi generally from a mechanical pump falls off pretty bad at WOT. if those are your readings you have ABSOLUTLY no reason to replace you lift pump. it feels gutless because the injection pump is defuling around 2200rpms and thus you loose all your acceleration and become gutless. install some govoner springs and enjoy.

jake74 01-13-2013 10:01 PM

That is just where it should be.

codycatract 01-15-2013 07:43 AM

I don't have a fuel pressure gauge yet and ya I can feel defueling but when I'm wide open it like spudders. And won't speed up unless I let off a little then get back into its new rig to me to imma replace it anyway till I get air dog. But how is changing the government spring compared to the VE pump

turbo2332 01-15-2013 09:35 AM

its internal pump work and will take a newbie a couple hours to do. i feel you are wasting money by replacing you lift pump. the reason for the spudder has already been told to you, its your money and time but im done with this thread if you wont listen to the advice you ask for.:argh:

codycatract 01-15-2013 11:57 AM

I'm not new to wrenching there is a difference between refuel and what its doin thanks for the help I couldn't really explain what it was doin but the lift made it go away


All times are GMT -5. The time now is 10:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands