Desperate times call for desperate measures... Today was a trouble-free day with the truck, so I spent the day replacing CV joints in an old corolla for a friend, that was a clusterfuck, but I got it done and it drives a whole lot better now.
I am Macgyver 2.0 ;) |
a country boy can survive
|
Originally Posted by Rx7man
(Post 969733)
I certainly can see the difference... but, I was very disappointed in my headgasket.. It is stamped MADE IN CHINA
|
I can't deny the difference between the cummins gasket still being better than the felpro, but I'm still a little miffed
|
Originally Posted by Rx7man
(Post 971587)
I can't deny the difference between the cummins gasket still being better than the felpro, but I'm still a little miffed
|
well, I got my timing bumped, don't know how far.. far enough it revved happily and didn't sputter... I figure about 16*... drastically changed EGT's... my truck and trailer together weighed in at over 7 ton and I was able to pull hard up a hill keeping the egt's at 1000F, if I really put my foot into it it would go up to 1250. It also completely changed the smell of the exhaust. That wasn't the end of my problems though... As I was downshifting into 4th for engine braking coming into a long downhill, I couldn't get into any gear at all... I was swearing up a storm, and when calmed down, and before I called a tow, I yanked upward really hard on the stick, put it in 5th, and let it down again, put it back into neutral, and voila!, I was back on my way again. about 100 miles later, my throttle stuck again.. this time the return springs had worn out,... a couple zip ties later, I got it fixed and made it home.
Whew I like the extra timing in the truck... I'll be able to compare mileage soon.. though winter is never a good time to do it... I spend too much time warming up and feeding cattle to get any good mileage... it does seem to warm up a little better though |
I looked on my Cummins gasket and did not see any "Made in any country" marks.
Sent from my CMP741E using Tapatalk 2 |
Maybe on the planet it was made, there are no countries?? I would hesitantly assume the US...
|
Originally Posted by Rx7man
(Post 975293)
Maybe on the planet it was made, there are no countries?? I would hesitantly assume the US...
Sent from my CMP741E using Tapatalk 2 |
It sucks when ya cant find good parts made in the good 'ol USA anymore. :td:
|
All times are GMT -5. The time now is 11:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands