Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   12 Valve 2nd Gen Dodge Cummins 94-98 (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/)
-   -   plzzz help me im stuck and dont know what to do (https://www.dieselbombers.com/12-valve-2nd-gen-dodge-cummins-94-98/104223-plzzz-help-me-im-stuck-dont-know-what-do.html)

cummincider 10-24-2012 01:17 PM

plzzz help me im stuck and dont know what to do
 
i was recently experiencing power loss upon heavy excelleration and it would stall so i tried changing my fuel filter then my water seperator filter well i didnt have enough diesel to fill up the water seperator all the way btw this is my first diesel i know im stupid well i sucked up air truck wont start ok and this is were im confused i pressurized my fuel tank bleed over flow valve open low pressure bleed screw been cranking it cranking it one injector is getting fuel outta the line but the others not a drop and ive cranked my battery dead 2 times idk what else to try should i keep cranking i dont want to ruin my pump or starter plz any help will be greatly appreciated thnk u

---AutoMerged DoublePost---

:argh:

Farmboy 2.0 10-24-2012 01:31 PM

You need to crack a few injection lines and have someone close the lines once that fuel is coming out

cummincider 10-24-2012 02:37 PM

Yea I got the back 2 and the third is just dripping but battery died again just keep turning it over till it comes out ? On the rest

---AutoMerged DoublePost---

? And should I crack all of them or just a couple

Farmboy 2.0 10-24-2012 02:58 PM

I would try that for sure. You made sure everything is kosher on the pump and everything

cummincider 10-26-2012 01:18 PM

Update I've tried opening the lines for the last 2 days only getting fuel outta the back injector and nothing outta the others keep trying but nothing any idea air leak or injection pump?

carova_kevin 10-26-2012 09:47 PM

May have a pinhole or Dryrotted fuel supply line. There is a rubber section tucked behind IP that's where mine was leaking. Good luck

dfiperformance 10-27-2012 12:57 PM

try just cracking #1 at the pump. Thats what I always do.

cummincider 10-27-2012 01:43 PM

It's all good I got it last night finally thanks u guys

dfiperformance 10-28-2012 10:04 PM

Good deal

:c:

Farmboy 2.0 10-29-2012 03:26 PM

Have you tried pressurizing the system with the plunger in the lift pump as well.


All times are GMT -5. The time now is 04:02 AM.


© 2024 MH Sub I, LLC dba Internet Brands