Harness requires new pins
 

Does anyone know the pin type and what part number/description the crimper is? I assume they're deutsch but haven't worked on a harness this old in some time.

A number of pins all over my 1994 cummins/automatic's harness are worn out & there are just too many splices from previous owners. The connector housings are fine though and have enough open slots to cover my needs if I can just add male and female pins to them as well. Another (new) harness isn't possible right now but I have nothing but time to re-wire and re-pin the whole thing.


Active Duty USAF In Oklahoma. '94 Cummins 3/4 2wd (47RH) Auto trans. TPS replaced w/POT @2.0v, Trans. temp sender replaced with 1K Ohm Resistor.

-----
UPDATE
---

While I still don't know WHAT I need , I have found a few suppliers for anyone else in the same boat with electrical fittings:

Mouser Electronics - Electronic Components Distributor
Automotive Electrical Connector Pigtails, Terminals, Tools and More
Electronic Components Distributor | DigiKey Corp. | US Home Page
http://www.laddinc.com/images/storie...orselector.pdf


If anyone can direct me what we have, I'm happy to share the knowledge

---AutoMerged DoublePost---

morning bump :jump:

:hellox: Need some knowledge love :tu: