3rd Gen Tech: Cummins Grill logo
I debadged my 2007 truck a while back, and have been trying to come up with something to replace the Dodge emblem on the front grille. I decided to put the Cummins “C’ on the grille.
This is what I came up with, and how I did it.. http://i28.tinypic.com/3346ced.jpg First, I had to cut of the “Turbo Diesel” part. I used a cut off wheel, starting from the back of the emblem low enough not to get into the actual “C”. It helps to put the “Turbo Diesel part in a vise to hold it. http://i31.tinypic.com/zti5hw.jpg This is what it looked like after cutting. Can’t stress enough to be sure you are low on the “C”, if you use this method, because the plastic gets hot and melts a little. http://i32.tinypic.com/v4segx.jpg Next, I did some sanding and then some trimming with a sharp knife. http://i29.tinypic.com/35nde7l.jpg http://i25.tinypic.com/34988d4.jpg\ This is what it looks like. http://i32.tinypic.com/v4segx.jpg I used some goo gone to clean up the back side of the “C” http://i31.tinypic.com/2ugm7v9.jpg http://i25.tinypic.com/143zthl.jpg Here it is cleaned up http://i32.tinypic.com/ojifbo.jpg Next, I removed the Ram emblem using fishing line. (10 Pound test) http://i29.tinypic.com/10ohcmp.jpg |
Continued
I then separated the Ram head from the black background piece. I used the knife to trim away the snap sockets so I’d have a flat surface to mount the “C”.
http://i30.tinypic.com/2rhy05j.jpg I cleaned the glue and sticker residue off the grille. http://i29.tinypic.com/kdlnhd.jpg I masked off the emblem area, and began to paint it black. This will help blend the black background piece into the grille. http://i29.tinypic.com/11aih6q.jpg After a couple coats of Gloss Black http://i32.tinypic.com/nq4h0k.jpg The “C” is flat, and the black background piece is curved a little, so I used a dark gray RTV to glue it to the black background piece. I let the RTV dry overnight. This is how it looks so far. http://i28.tinypic.com/2091ugn.jpg After letting it dry overnight (It’s not completely dry, but good enough to work with). I used the same RTV to glue it to the truck. Here’s the finished piece. http://i27.tinypic.com/2pysyg0.jpg Daylight pics: http://i26.tinypic.com/4gp1s0.jpg http://i28.tinypic.com/144b8g8.jpg http://i29.tinypic.com/2dqsjsj.jpg As always, feel free to comment or ask questions! |
Looks badass, try getting a shot from the front about 4' out looking towards the grill.
|
Originally Posted by ride42
(Post 247745)
Looks badass, try getting a shot from the front about 4' out looking towards the grill.
|
That is good looking, looks a lot better than the ram head.
|
Sweet!:up2:
mishkaya |
To the top for the morning crew! :howdy:
|
cool!:U:
|
:U::rocking::rocking::U:
|
no offense... but you turned on the little "flower" on your camera when trying to take detailed up close shots, it will not be blurry and you will get the killer shot you are going for.
|
that is awesome!!!
One more project to add to the list!:U: |
would that be possible to do a second gen
|
Originally Posted by Camotanker
(Post 252768)
no offense... but you turned on the little "flower" on your camera when trying to take detailed up close shots, it will not be blurry and you will get the killer shot you are going for.
I dont have that camera anymore. I'll go look for the "Flower" on the new camera! Thanks for the help! :U: |
:U::U:
|
Looks good. Good lookin' truck. I need me one of them hoods. Did you put in on? Where'd you get it? I've been looking around trying to find one but no luck.:U:
|
Originally Posted by MegaMan
(Post 253313)
Looks good. Good lookin' truck. I need me one of them hoods. Did you put in on? Where'd you get it? I've been looking around trying to find one but no luck.:U:
About the hood, I had the Dealer put it on and paint match it. It's the SRT-10 hood. You should be able to inquire about it at your dealer. |
Dude that is one of the nicest 3rd gen i have seen from the front.
|
Originally Posted by SEA04DMAX
(Post 253579)
Dude that is one of the nicest 3rd gen i have seen from the front.
Judging by your avatar and signature pics, you have a really nice GMC/Duramax! Maybe you could do a photo album, so we can all enjoy your truck with you? |
Nice!! Too bad I gave my original C's to the body shop.
|
Originally Posted by wildbill
(Post 253695)
Nice!! Too bad I gave my original C's to the body shop.
I had to buy a couple to do my hub caps here: https://www.dieselbombers.com/cummin...ins-logos.html |
Thats awesome Wild, nice work.
|
awesome! gonna have to do that to mine
|
Cool! :U: I appreciate the compliments!:ok1:
|
Badass :U:
|
Sweet job. Although I have a 05 i can't do it. I did not have any luck with goo gone i used naptha a low grade paint thinner which did no harm to the paint and i nearly rubbed my fingers raw from getting the glue off the badages.But was well worth it in my opinion in the end.
|
Dude I'm thinking your truck is very very nice. Have you done your headlights yet?
It makes a big diff. I had to paint my grill shell to match my truck sense you cant get a Mega with Sport package. I was so close to filling that void and loosing the emblem altogether, but chickened out. Your idea is great. |
Headlights are "On the list"! :U:
---AutoMerged DoublePost---
Originally Posted by chadillac
(Post 266804)
Sweet job. Although I have a 05 i can't do it. I did not have any luck with goo gone i used naptha a low grade paint thinner which did no harm to the paint and i nearly rubbed my fingers raw from getting the glue off the badages.But was well worth it in my opinion in the end.
This is for an 2001... It wont work for you right? http://i26.tinypic.com/2vwda8k.jpg http://i31.tinypic.com/2qa4qz9.jpg There has GOT to be a way....:humm: |
Looks great.:U::U:
|
Subscribing!!!
|
That looks awesome Bill.:U:
|
Thanks, Austin.
|
2 Attachment(s)
I finally did this to my 04.. it was kind of a PITA tryin to get the rid curve to the back side to fit right but i got it...
:woot2::wave: |
AWESOME, Jeremy! :choochoo:
|
All times are GMT -5. The time now is 05:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands