Wiring Diagrams For 05 6.0 W/Dual Alts?
 

Does anybody have a link that will show the underhood wiring for the 05 6.0 with the dual alternators? My truck is a bare bones commercial with no driving lights, clearance lights, or any other accessories.

Also is there a factory feed for a bumper mounted winch? I know there was / is the optional driving lights in the factory bumper. I'm thinking about adding an aftermarket bumper with auxillary lights and a winch. It sure would be great if the leads were already there to use.

And what are the opinions on hooking up a 120V convertor ( or is it invertor?)

I'm no electrical engineer but can usually figure out what is needed to get the job done.

These?

http://i150.photobucket.com/albums/s...alternator.gif

http://i150.photobucket.com/albums/s...lternator2.gif

Kinda sorta. I understand some of that but don't know what some of those alpha / numeric references stand for. I'm really looking for how the charging system ties into the accessories and what the wire color codes are for the open / hot leads.

Just looking for a short cut to keep from having to get out the tester and check and cross reference with with the fuse block.

As far as alphanumeric stuff goes:

The 3 digit numbers on the left of the circuit are the circuit numbers. I think the 1 and 2 digit numbers are the pin numbers at that connector.

Any number starting with a "C" is a connector.

Any number starting with an "S" is a splice.

Any number starting with a "G" is ground.

The wire colors are on the right side of the circuit. The first color is the main color of the wire. the second is the tracer color. So in the 2nd picture of circuit 904 the wire color is "LG/RD"= Light Green wire with a Red tracer.

LG- Light Green
R- Red
V-Violet(purple)
GY- Gray
DB- Dark Blue
YE- Yellow
WH- White
OG- Orange
LB- Light Blue
BK- Black