How bout a step by step guide on downloading updates for these things. I've been tryin but gettin no place quick. This one in particular is for a 1999 24V.

I downloaded a trial version of WinZip and it's installed and ready to go.

I saved the update file from the SMARTY site. http://madselectronics.com/downloadf...3V126CDR12A.7z


From there I can't make anything happen. And do I need to return the truck back to stock setting before I do this update or can it stay where it is. -

Uncle Bubba's Sig:

99 Quad Cab, 4wd, Drag Comp W/Pump Wire & Boost Elbow installed, K&N Air Canon, MBRP exhaust, Belt Drive Lift Pump and bottom Bulkhead feed from the tank, Isspro EV Pyrometer, Boost Gauge, Fuel Pressure Gauge, DT Pro Fab Trac Bar, South Bend 13-1.25 Con O Clutch, Ranch Hand Bumper, Borgeson Steering Shaft, Black Silicone Boots, 2" Lift Soft Ride Front Coils, Solenoid High Idle Kit, Bilstein 5100 HD Shocks, Rickson 19.5 Wheels w/Hancoock Rubber, HD Maxx Link Sway Bar Links, Superlift dual front stabilizer, EGR Brakes Front and Back, RV275 Injector's, Blue Chip VP44, Prodigy brake controller, B&W Gooseneck hitch and more I can't remember right now. Not to mention more to come I'm sure.
374.2/846.7 at 30psi

First thing is you should make a new folder, save it to your desktop, then name it Smarty. Download the file to that folder, then right click and extract here. Should have a new file ending in .smt, which is the one that you need to point the updater to. Set the updater in motion and in 5-7 minutes your Smarty should be good to go. -

wildbill's Sig:

I Drive An 06 Dodge Ram 2500

Powered By a 5.9 Cummins

It Has Some Parts But Could Use More

96,000 Miles

Big Sky Bombers Social Group

I don't get any "save to" options. Just "Open" or "Download" and it automatically puts it in my documents someplace. I have to use the search to find it but it's there. I have it in the Zip folder but can't get it to do anything from there. -

Ok, now when you right click on the file in the Winzip program, click on extract. It should open up you Documents page. Right click on it, select new, then new folder. Rename it Smarty. Extract the file there and you should get a new file ending in .Smt -