love em'

on The Crapsman brand the clicks are too far apart -

i have 2 sets well technically 4. 2 sets of sae and 2 sets of metric.
bought the first set from titan.. they suck monkey ass. i have just about broken all the ratcheting mechanisms
so have a buddy taht sells matco tools. ordered anotehr set from him. a bit more expensive (225 bucks for a total of 20 wrenches) but they are awesome.. nice tight ratcheting mechanisms..and what not. -

mobs241's Sig:

blew up 99 ctd. gone

89 jeep wrangler juggy. 383 stroker 700r4 d300 14bolt spool 60 front 39.5 iroks on humvees
4link rear with ori no2 struts waggy fronts with shackle reversal 106.2 wb.

i must have the same set you do mobs. bought mine back in 98 or 99. damn tuff wrench. and there are some jobs that i really don't know if i coulda done without them. or atleast not without taking a ton of stuff off first. worth every penny IMHO -

Johnny Cetane's Sig:

2005 Chev CC/SB/4x4/Alli

Vaginas For Life!

I've owned three sets. Original gearwrench, craftsman, and Blackhawk. I currently use the Blackhawk. I have the SAE set from 3/8 to 1 1/4, and the Metric set from 8mm to 34mm. Also have Snap-On stubby ratchet wrenches. Really handy tools, wouldn't be with out them all. I like the Blackhawk wrenches because they have a fine tooth and work in really tight spaces. -

ahhh yes the gear wrench has saved the day Many, many times for me I love them....
smaller the teeth the better IMHO -

53 willys's Sig:

Mark
06 Mega G56~Uinta Diesel Performance Weighted Shift Knob~HMR Street Drag DD~Smarty4.4~Airdog150~Willys Whistler Stage II Intake~Isspro Preformax Gauges~Uinta Diesel Coolant bypass~& some other stuff

Love my gear wrenches!! -

HOTMOPR's Sig:

95 CTD 4X4, Suncoast Trans, Suncoast billet input, Goerends Triple disc converter, ATS flexplate, HT hybrid 35/40-12 wg over a 3B-26 with 50mm gate,Set at 50 psi, No studs, No rings, # 0 plate, 4K GSK,Empty AFC, laser cut DV's,Timing 17.5*, N.E.D 435 sticks, 5" sewer drain to 7"tip, AFE, Autometer gauges,

Got several sets myself and use the hell outta the stubbies, One of the best tool inovations ever! -

GBWELDING's Sig:

BLACK 02 4*4 SPORT 3500 DUALLY QC, 6 SPEED, LEATHER, Did I mention it's a CUMMINS

I got 6 sets (regular ones, stubbies, and the ones with the bendy heads)...both SAE and Metric. -

Ive got the gear wrench brand in standard, but I plan on buying a set of each of them, just to have.. I love the things!
Scott

For those of you looking for some, here are the SAE gearwrench 8pc set on sale for $38
http://www.sears.com/sr/javasr/produ...seBVCookie=Yes
Scott -

dieseljunkie's Sig:

Be your own boss- Sell AMSOIL Products!
Visit My AMSOIL Dealer Website!

I tell everyone dont use my flex head gear wrenchs unless they want to buy a set because after you use mine you will want your own. -

JohnDeere9610's Sig:

95 F350, Auto Single Tire, 4x4, Crewcab, Longbed, 4" lift, 35" BFG's All Terrains, 12000 Milemarker, Exhaust, Diy 160cc Injectors,Shimmed FPR, Tymar Intake, Tyamr HPX, 7.3L Intercooler, 6.0L Tranny Cooler, ISSPRO Guages Trany/Boost/Pyro, building tranny

i don't have any yet but i am shopping for some....just didnt know which brand to go with but after reading this, i have a better idea of a brand to look at. Thanks!! -

I think my next tool purchace will be the stubbies. Ive got the regular ones and dont know what i did before i had them. -

duramaxdavid's Sig:

04 LLY CC LWB 25.5 feet of fun
424/798

my next tool purchase will be the vortex socket system...i used them while puttin a tranny in a cavalier and loved them... -

power95's Sig:

2004.5 CHEVROLET 2500HD
4 DOOR-LONGBOX
6.6L LLY DURAMAX
TO MUCH TO LIST

all my wrenchs are snapon, ive got the 15 degree offset ratcheting wrenches in both metric and standard, 0 degree offset in both mertic and standard, and the stubbys in the sam order. i love them woudnt be able to do a damn thing without them.

wes -

we have the craftsmans ones at work and I dont like them near as much as the gear wrenches -