Does anyone have instruction on how to, and the best place to get parts, for a home made, do it yourself, METHANOL/WATER INJECTION.

AlCorr's Sig:

04.5, Ram, 2500, Flame Red "Dragon", 2/WD, 48RE, 4:10, Quadzilla Commander, Xzillaraider 2 XZT, Rokk timing sensor, Banks High Ram Intake, Mechanical Oil Pressure Gauge, BD Auxiliary Lift Pump, Aero-Turbine 4040L, Navigation Sym, Firestone Air Bag, Hellwig Sway Bar, Spray/Liner, Factory SRT-10 Hood, Mag-Hytec Diff. & Tran. Titanium 5er, Honda EU2000iA

hmmm.... Maybe you should have a mod move this into the general DIesel Section. I know alot of guys build there own setup so they should chime in.

RSWORDS's Sig:

DIESEL BOMBERS SUPER MODERATOR

CLICK HERE FOR SPONSORSHIP INFORMATION
CLICK HERE TO BECOME A PREMIUM MEMBER AKA BOMBARDIER
___________________________________________

I have a source for Shurflo pumps right across the street from me, but they want over $200 for a 150 PSI pump; the best places to get a pump from are Devil's Own, Cooling Mist or Snow, for around $115-150.

The best nozzles are $20 diffuser nozzles available from McMaster-Carr; way better than the stuff the waterjection companies sell for the same price.

The best DIY controller is the "SMART DMS" from Cooling Mist; computer programmable datalogger/ multi-dimensional control unit for $200, capable of way more than the standalone controllers other companies sell for way more. You can get pressure transducers and temperature transducers for it off of eBay for a few Jacksons apiece.

The best solenoids I've found are from Cooling Mist for $40 a piece; I haven't found any other sources for them for any cheaper.

That's all assuming you don't want to build a real big-boy 1000 PSI injection system out of nitrous solenoids and a pressure washer.

1stGen.org :: View topic - Begle's Water Injection

Begle1's Sig:

A custom-made electro-digital-hydraulic water injection system with a 1990 D-250 wrapped around it that on a good day might break 15 seconds in the quarter.