![]() |
![]() | ![]() |
|
|||||||
| High Desert Ravelco Visit - High Desert Ravelco |
We have a few made up and most of them are already sold! SO, if you are wanting to cure your 1/4 tank issues with an Airdog or FASS fuel system with upgraded fuel lines look nor further! We are going to start pre-ordering these ... JOIN NOW TO REMOVE TRACER
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||||
|
||||||
|
We have a few made up and most of them are already sold! SO, if you are wanting to cure your 1/4 tank issues with an Airdog or FASS fuel system with upgraded fuel lines look nor further! We are going to start pre-ordering these upgrades. Here are some pics of the unit
This new billet aluminum pickup fits in the FACTORY location inside your fuel canister! ![]() Here is a shot of the canister disassembled. You will have to split your canister apart to do the mod. DON'T worry. this is not rocket science to complete this mod. I will be taking more pics of the complete upgrade with directions. you will notice that the bottom of the canister, there is a cylindrical item. this is where you will be drilling the can with a 3/4" hole saw to open up the bottom to ensure there is NO restriction for the feed line ![]() Here is a close up of the pick up in place ![]() There is a factory lock ring that you will re-use to lock our kit in place. I have personally tested each unit we made today for fit and I tell you it was not easy to get out of the can after I got it in there. Had to use a punch on the bottom side and push it back out. ![]() Here is a shot of the lock ring and the suction side of our unit. ![]() We are going to start taking orders for this and ship them out as they come off the CNC mill. Will have final pricing on Monday. The owner of the shop and I worked on them all day. - |