Well you asked for them, so here they are! HD Fabrication is pleased to announce that we now carry drive shaft loops for the front of 2nd gen Dodges. Here is a sneak peek of the raw loops, as they will get blasted tomorrow, and powder coated on Tuesday. They attach using your factory bolt holes, and require no drilling or tapping into your frame. They come in standard colors of gloss black, red, and silver.
Fronts are $195 shipped, and will ship out the next day.

Please let me know if you have any questions or comments, and yes the rear loops are on there way...

Thanks,
Aaron/HD Fab



Thanks again to DISPLACEDTEXAN for letting me use his truck for mock-up. -

Attached Images

	PICT0007.jpg (67.0 KB, 22 views)
	PICT0004.jpg (69.4 KB, 21 views)
	PICT0005.jpg (72.0 KB, 19 views)
	PICT0006.jpg (70.8 KB, 7 views)
	PICT0008.jpg (66.3 KB, 21 views)

wow - very nice -

Dr. Evil's Sig:

98 12V quad cab 4X4 AND 2001 24V quad cab 4X4

Those look sweeett--- do you have any pics on a truck???? -

newconcorddodge's Sig:

99 QCLB 4WD, "BUILT" Goerends Auto
Rollin on 285 BFG'S All Terrain
4" Stainless SILVERLINE Turbo Back Exhaust
BHAF Edge JUICE w/ATTITUDE Moniter

I wont have any on a truck till this weekend. I dont own a 2nd gen that has a stock cross member so I have to use and abuse friends trucks to mock off of. It will look better in the picture with them powder coated anyway (almost bling like LOL). Thanks for all the nice comments guys!

Thanks,
Aaron/HD Fab -

I could take some pics... -

hi Aaron. got my loops on the 24th of dec. and probly get them on @ the 8th-10th of January and will post pic' for ya as soon as i can after that. Very nice product at Very resonable prices. good luck with your venture, should be Big! -

feo47's Sig:

2005 ram QC 3500 4X4 diesel -Smarty & MP8 SPS 62/12, Banks Intercooler & High Ram Intake, ATS Exhaust Manifold, 75HP Injectors, Fass 150/150, DTT Billet Trans and Super Single TQ,S&B CAI, Cat Delete & Magnaflow Muffler Current best 12.60 @ 107.75 10/08 new in 1/09 P&P head 100lb springs, titanium retainers, valves guides & 625+ studs, PPE dual fueler & Smarty upgrade to TNT-R

I have been getting quite a bit of attention on the 2nd gen loops, and think once I have a rear to offer it will really catch on. I personally think the fronts are kinda neat looking. Thanks again, and I will be looking forward to the pictures.

Aaron/HD Fab -

Just wanted to thank Displacedtexan again. He just left the shop, and I think we came up with a pretty kick a$$ design for the 2nd gen rear loops. I will be up very late tonight making the alignment jig, and if everything goes right I will be able to have some for sale by mid week.

Thanks again Tex for the use of your truck!!

I will have pics of the coated fronts, and hopefully the rears this week. I will have to have Tex come back out so that I can get some pics of the loops installed on a truck.

Trust me... these will put the HD in HD Fab!!

Thanks
Aaron/HD Fab -

Just picked up a pallet of coated loops....

Thanks,
Aaron/HD Fab -

Attached Images

PICT0020.jpg (50.8 KB, 19 views)

toolmanoffroad's Sig:

[Check out or products at www.hdfabrication.com Our website is new but were adding new products all the time.

Hes a good man - wish he would drop by here once in awhile though. -

Here are some pics of a new design for the 2nd gen short bed 4x4s with a one piece drive shaft. I had to go a different route on these because of the larger bulge around the front fuel tank strap. This is a very light weight race loop that will bolt on the factory tank support in four places. It is available with the Cummins "C" or without, in three standard powder coat colors RED, BLACK, and SILVER. It runs $88.00 and includes shipping in the good ol USA.

Please let me know what you guys think, you feed back is very important to me!


Thanks
Aaron/HD Fab -

Attached Images

	PICT0022.jpg (37.0 KB, 12 views)
	PICT0021.jpg (35.5 KB, 10 views)
	PICT0023.jpg (35.0 KB, 8 views)
	PICT0025.jpg (65.4 KB, 19 views)
	PICT0024.jpg (60.1 KB, 16 views)

The C is a nice touch -

Im trying to make the best looking loops available.... -

I am sorry I have not had a chance to get those pics to you.

Do you still need them? -

I think I have it covered.... made a few changes, and I think its all good. -