2001 superduty power steering at times has very little assist at low speed like when turning into a parking spot etc.fluid level is up, pump seems to have enough assist when at speed and no excessive noise coming from the pump.but when turning at just off idle its like manual steering.tires are 305s not too much larger than stock.anyone else experience this, any fixes ? -

mine does it... havent gotten around to fixing it...

but i plan to flush the whole system with synthetic ATF to see if it stops the noise and lack of low speed steering....

the brakes are run off the PS system too so parking lots are no fun (low speed and using both brakes, steering).... -

blk99's Sig:

early 99 CC LB Dually 2wd, slush box, PHP Tunes, late 99 conversion, AD's, Termy modded 17* hpop and Termy Scan Gauge, exhaust brake, little bit bigger IC, gauges, intake, exhaust with 6" tip, and some other stuff that is irrelevant........ oh yea and it has 480K original miles...

try a flush -

Superstroker10's Sig:

Early 99 CCLB Phantom II'sX4
What im Running: DP-f6,Terminator Engineering HPOP's, Built Trans with Billet T/C
350cc Bcodes
NEED: MODDED H2e- IF you have one pm me

2008 F250 Reg. Cab Long Bed
4WD sittin 20's
16.01 @ 84mph BONE STOCK
New: SCT performance tune 14.92 @ 88 mph cuttin a 1.90 60FTW/ 20's and 35's
18's and 33's-waiting for track time

I have this problem too. I also have the brake pedal get soft when getting off the highway if put it in neutral and instead of down shifting. -

have tried flushing system /synthetic fluid ..lucas oil etc.anyone one know of a aftermarket pump with more flow/pressure that might work to improve this issue .seems that more than a few of these trucks have a similiar problem.thanks -

I have an upgraded one from Nolimit4x4 it can be used with or without ram assist supposed to have more flow never got around to installing it plus I lost the instructions somewhere might get rid of it if you want it.
-

hey yea my 01 is doing it too if you are still getting rid of that up grade i am interested -

yup im still getting rid of it but like I said I don't have the instructions for it anymore -