What causes the Injector drive module to go out? I have 01 F-450 and the code it brought up were IDM and ECU failure. My local shop said the IDM was a $500 part, to me that sounds kinda pricey. What do u all think? -

cummin73's Sig:

Current ride 1992 F-250 351W auto, reg cab, 4x4, 4'' lift, 35x16-16 Boggers, daul 2.5'' strait pipes, 35% tint, and Rebel Flag tailgate. What i realy want is 2001 F-350 with a 12valve Cummins

they can short out like any other electrical piece on a car/truck

500 sounds pricey. search around various fourms and you can find plenty cheaper than that -

Superstroker10's Sig:

Early 99 CCLB Phantom II'sX4
What im Running: DP-f6,Terminator Engineering HPOP's, Built Trans with Billet T/C
350cc Bcodes
NEED: MODDED H2e- IF you have one pm me

2008 F250 Reg. Cab Long Bed
4WD sittin 20's
16.01 @ 84mph BONE STOCK
New: SCT performance tune 14.92 @ 88 mph cuttin a 1.90 60FTW/ 20's and 35's
18's and 33's-waiting for track time

I offer IDM's pre-programmed for $399.00 plus the $300.00 Core.

IPR's are $229.00.

Shippings included on both. -

mysterync's Sig:

Offering a Full Line of Diesel Performance Products, OEM and OEM Replacement Parts!
Real People, Real Shop , Real Power!

Home of the Extreme Western NC Dyno Day

Direct Dealer For Suncoast Converters

Call or Email Today For a Custom Price Quote

828-266-9077 Shop
828-262-3292 Fax
Sales Department Email
Tech Support Email

Old Truck : 2001 2500 4x4 Dyno Proven 839RWHP-1500+FTLBS
SO-VP44 - 66/71/16 - 7X14 F1's - Studs and Rings - Hamilton Cams Pushrods and Valve Springs - NXpress 2 Stage Boost Controlled Dry Kit - SBC 3850DD and Much Much More

What programing are you doing to a IDM? Are you modding them? -

CSIPSD's Sig:

01 F-250 SC,175k,16gauges,AFE-2,Modded H2e,6.0 IC,Hybrids,Water inj,Swamp tuned,Studs,Forged rods,910 springs,4"dual's,Aero,6" tip's,100 axl tank,4" lift,37" TOYO MT's

With TN BB and old set up...467hp-1066tq

Joe-AKA Gauge whore

Nope, Just a factory IDM -

My dad ound one for 200 so he already bought it sorry, thanks for the help mysterync -

I have one that I took from a 2000 4500 superduty, I thought it would fit my 2500 but the numbers on the back were different, mine went after I shorted out one of the eletrionic brake controller. If this will work I will ship it for 200, check the numbers below for a match.
Murray

(GLF4 EEC-V9) F81F-12A650-PE H2ZWB2X67G7G3J -