Ford Powerstroke 99-03 7.3L Discussion of 99-03 7.3 Liter Ford Powerstroke Turbo Diesels

I need help!

  #1  
Old 01-19-2014, 09:59 PM
av8r's Avatar
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default I need help!

I have a 2000 f-350 with a 7.3 . When I put my foot in it after a few seconds the "check engine light" comes on and it seems to loose power, it kinda smothers out and runs sick. if I switch the key off then back on the "check engine light " goes out. it seems to run fine until I press the accelerator down pretty firmly. I have replace the cam position censor and this didn't help, also it doesn't show a failure code at all. anyone have any ideas??? oh... I have replaced the fuel pump and dropped the tank and cleaned the screens,
 
  #2  
Old 01-19-2014, 10:18 PM
joebob3093's Avatar
Moderator
Join Date: Jul 2008
Location: Powell Butte, OR
Posts: 2,558
Received 138 Likes on 122 Posts
Default

Your running out of high pressure oil
 
  #3  
Old 01-19-2014, 10:50 PM
diablo2dusk's Avatar
Diesel Fan
Join Date: Oct 2013
Location: Grantville, PA
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

may be your injection pump.
 
  #4  
Old 01-19-2014, 11:08 PM
joebob3093's Avatar
Moderator
Join Date: Jul 2008
Location: Powell Butte, OR
Posts: 2,558
Received 138 Likes on 122 Posts
Default

Powerstrokes dont have injection pumps
 
  #5  
Old 01-20-2014, 06:15 PM
av8r's Avatar
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

That makes since but what would cause a loss of high pressure oil??????
 
  #6  
Old 01-20-2014, 06:17 PM
joebob3093's Avatar
Moderator
Join Date: Jul 2008
Location: Powell Butte, OR
Posts: 2,558
Received 138 Likes on 122 Posts
Default

The 2000 engine runs AD code injectors and they love oil. Your oil pump could be weak. Is it chipped or have any programing?
 
  #7  
Old 01-20-2014, 06:50 PM
av8r's Avatar
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

not that I am aware of.... it blew two high pressure hoses a few months ago and I had a hose made using high pressure hydrolic hose

---AutoMerged DoublePost---

I'm sure it is all stock.
 

Last edited by av8r; 01-20-2014 at 06:50 PM. Reason: Automerged Doublepost
  #8  
Old 01-20-2014, 06:59 PM
joebob3093's Avatar
Moderator
Join Date: Jul 2008
Location: Powell Butte, OR
Posts: 2,558
Received 138 Likes on 122 Posts
Default

Your pump might be getting weak, need a scanner to see
 
  #9  
Old 01-20-2014, 07:14 PM
av8r's Avatar
Newbie
Thread Starter
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

is that something that I can have done at the ford dealership or what would u recomend?
 
  #10  
Old 01-20-2014, 07:37 PM
joebob3093's Avatar
Moderator
Join Date: Jul 2008
Location: Powell Butte, OR
Posts: 2,558
Received 138 Likes on 122 Posts
Default

They could do it, I dont like going to dealerships. Where are you located?
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:59 AM.