Hello guys,

I recently installed a new 6.4 and it will NOT start.

I replaced the longblock, new inector lines and high pressure pump, cleaned injectors and so on.

When i crank it over it builds pressure from 300-900 psi.

I bled air out at the fuel cooler

when i first crank the truck it will build up to 900psi then drop off and stay steady at 3-500psi

It tires to fire, im getting white smoke out of the tail pipe

as a last ditch effort i loosened and bled the two lines that go into the heads. got some more air out

only code is low cranking pressure
then called it quits last night


ANY HELP? keep cranking till she fires?

 

hello everybody

to answer some questions.

Fuel bowl was filled before craning engine

both the FEED and RETURN have been bled on the fuel cooler

NEW FOMOCO filters in frame and in bowl

All 8 injectors were cleaned, serviced and tested with calibration oil.


Last night i removed the injectors for testing, will update shortly.

thank you

also,

IF YOU HAVE REBUILT A 6.4 and installed it please PM or CALL me, I have a few questions

thank you

Steve
708-699-5902