hp!!!
#1
hp!!!
Hey how ya doin im new here, and i was just wondering what kind of hp Im pushing idk if anyone has exactly what i have but if anyone has a close comparison and has had theirs on the dyno i just want a ballpark if ya can. I have an 06 ford f350 with 6.0 with sct w/ innovative extreme race tune, cfm large mouth intake, egr delete kit, 185cc injectors, ats stage 2 tranny, arp head studs and a modified the plate blocking the inlet for the air intake behind the grill. I work alot so i dont have much time to take her over to set up a pull or two on the dyno any guesstimate on the hp would be greatly appreciated?
---AutoMerged DoublePost---
anyone ?
---AutoMerged DoublePost---
anyone ?
Last edited by Al31031; 09-25-2011 at 03:14 AM. Reason: Automerged Doublepost
#2
#4
Hey how ya doin im new here, and i was just wondering what kind of hp Im pushing idk if anyone has exactly what i have but if anyone has a close comparison and has had theirs on the dyno i just want a ballpark if ya can. I have an 06 ford f350 with 6.0 with sct w/ innovative extreme race tune, cfm large mouth intake, egr delete kit, 185cc injectors, ats stage 2 tranny, arp head studs and a modified the plate blocking the inlet for the air intake behind the grill. I work alot so i dont have much time to take her over to set up a pull or two on the dyno any guesstimate on the hp would be greatly appreciated?
---AutoMerged DoublePost---
anyone ?
---AutoMerged DoublePost---
anyone ?
#5
i agree iv gone through couple ats trannys im a dealer i snapped the input shaft on the first ats now its billet but the stock tranny held petty good until i upped the injectors then instant carnage thank you guys by the way for your input i was thinking 450 to 500 my self but its real hard to tell THANK YOU!!!!
#6
Well saying you've gone through a few ATS trannies isn't surprising even if you didn't have the big sticks. I've heard nothing but horror stories with ATS, especially their customer service.
I just realized you're in upstate NY, where are you at? I'm in Richfield Springs myself, but work up towards Utica. Also venture out Albany way quite a bit.
Check out Upstate Bombers when you get a chance, it's the upstate NY diesel club. We actually have a get together coming up towards the end of the month.
What are you running for turbo? There are a few guys using just a powermax and 190's and laying down 510-540ish rwhp. The tuning is killing it, you really need custom tunes to match larger injector/turbo combinations. I can't believe you don't go through headgaskets often, even with the studs. Cylinder pressures are probably through the roof.
I just realized you're in upstate NY, where are you at? I'm in Richfield Springs myself, but work up towards Utica. Also venture out Albany way quite a bit.
Check out Upstate Bombers when you get a chance, it's the upstate NY diesel club. We actually have a get together coming up towards the end of the month.
What are you running for turbo? There are a few guys using just a powermax and 190's and laying down 510-540ish rwhp. The tuning is killing it, you really need custom tunes to match larger injector/turbo combinations. I can't believe you don't go through headgaskets often, even with the studs. Cylinder pressures are probably through the roof.
Last edited by Mdub707; 09-26-2011 at 10:03 AM.
#7
highland is about 80 miles north of the city 45 minutes south of albany actually and thank you i will check that out the stage two i have now is holding up pretty good but i havnt turned the shift pressure up at all it shifts real nice, but the last one i had was turned up and man did it slam no slip all go!!
#9
the tranny has been built, the guy that owned it before me was a diesel mechanic and he owned a diesel shop north of where i live. ive been friends with him and his family so i know it was done right. also i was about to buy a new programmer but my ficm went out AGAIN, so im getting that fixed and upgraded first
#10
the tranny has been built, the guy that owned it before me was a diesel mechanic and he owned a diesel shop north of where i live. ive been friends with him and his family so i know it was done right. also i was about to buy a new programmer but my ficm went out AGAIN, so im getting that fixed and upgraded first