low boost code
#1
#3
#4
#5
The map sensor is mounted to the cab over by the heater and a/c box. It is a block sensor with a hose and connector coming off of it. The hose goes to the passenger side of the intake manifold.
#6
#7
I had a low boost code show up on mine, I think that if you happen to lug the engine down, then put your foot into it, the turbo can't spool up fast enough to catch up to the engine demand. the map sensor see's that and will throw a code, IF you do this several times. where you towing or just driving. I live in the mountains and some times when I go to pass someone I have to make sure my rpm is at least 2k or higher other wise it will throw the code. but not always light the MIL. because I have a way to read codes now every once in awhile I put my computer on the truck just to see whats up and low and behold there it is. i think it's a p0701 low turbo boost. I've cleaned my turbo it wasn't real bad but it still does it???? maybe I have a weak map sensor.
#8
i dont tow.. yes when im driving, ill jump on the gas an it works just fine then ill let off and drive down the road and then ill jump on her again.. junked up!! i know she needs to be cleaned out.. im starting to think i should just get a new one....
it loads up alot.. is that due to me driving like a gal??
it loads up alot.. is that due to me driving like a gal??
#9
Thread
Thread Starter
Forum
Replies
Last Post
Saams69
5.9 Liter CR Dodge Cummins 03-07
5
07-20-2015 11:21 PM
flash7210
Diesel In Distress - Support Ticket
0
07-05-2015 09:25 AM