Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

'03 6.0L. cold start runs rough

Thread Tools
 
Search this Thread
 
  #1  
Old 01-26-2010, 09:35 AM
rtaggs's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default '03 6.0L. cold start runs rough

hi. my 03 f550 with the 6.0 runs rough on cold start. it sounds like it is running on three cylinders for a few minutes. it will even do this in the summer. i have just recently gotten a code p02285, for icp sensor circuit low. it has never had codes but always ran rough. any suggestions would be appreciated.,

thanks.
Ron
 
  #2  
Old 01-26-2010, 05:26 PM
Mdub707's Avatar
BOMBARDIER
Join Date: Oct 2007
Posts: 8,208
Received 630 Likes on 510 Posts
Default

How many miles on the truck? How long since your last oil change and fuel filter change?

When's the last time the truck was re-flashed? Do your injectors buzz before start up or after shut down.

You may just need a newer flash (inductive heating flash), or you could have injectors/FICM going out... hard to tell.
 
  #3  
Old 01-27-2010, 05:09 PM
KLOVE's Avatar
Diesel Fan
Join Date: Dec 2009
Location: West Tennesse
Posts: 49
Received 0 Likes on 0 Posts
Default

When's the last time the truck was re-flashed? Do your injectors buzz before start up or after shut down.

You may just need a newer flash (inductive heating flash), or you could have injectors/FICM going out... hard to tell.[/QUOTE]

had all this done and put and icp sensor on it and it fix it
 
  #4  
Old 02-04-2010, 07:38 AM
rtaggs's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

60,000 miles..fresh oil and filters... no buzzing before start up or after shutdown.
 
  #5  
Old 02-04-2010, 08:07 AM
DieselDanBoy's Avatar
Diesel Wrench
Join Date: Sep 2009
Location: Torrington CT
Posts: 574
Received 28 Likes on 28 Posts
Default

so the problems fixed?
 
  #6  
Old 02-04-2010, 01:22 PM
rtaggs's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

not yet.. i was going to change the icp sensor until i saw where it was. now it will have to go to the dealer.
 
  #7  
Old 02-04-2010, 05:34 PM
DieselDanBoy's Avatar
Diesel Wrench
Join Date: Sep 2009
Location: Torrington CT
Posts: 574
Received 28 Likes on 28 Posts
Default

if im not mistaken, if the icp sensor fails i think the ecu gives out a set pressure so it will stay running, sort of a limp home mode. it should still start and run though.
 
  #8  
Old 02-12-2010, 12:59 PM
Begle1's Avatar
Diesel Bomber
Join Date: Mar 2007
Location: Capo Beach, CA
Posts: 3,910
Received 335 Likes on 247 Posts
Default

What's an "ICP"? I'm crosstraining in Ford for a job interview on Monday.
 
  #9  
Old 02-12-2010, 02:00 PM
BUBBAJON's Avatar
Diesel Fan
Join Date: Feb 2010
Location: Belton, SC
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah, i would like to know what ICP is to. And curious of how often the trucks need to be re-flash.
 
  #10  
Old 02-17-2010, 10:30 AM
rtaggs's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2010
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Injector Control Pressure sensor, located behind and below the turbo
 


Quick Reply: '03 6.0L. cold start runs rough



All times are GMT -5. The time now is 06:53 AM.