did egr delete and oil cooler ....white smoke under hood
#1
did egr delete and oil cooler ....white smoke under hood
ok so i did a egr delete and oil cooler on my friends truck and only thing left to do was put coolant tank back on and intercooler pipes i ran to napa to get coolant and my friend mjustve been excited to get his truck done well he tried gettting it to start and right when i pulled in from napa it fired up and saw a good amount of white smoke/haze coming from under the hood was not thick smoke just a haze i guess did i **** something up while doing egr delte and oil cooler or will it just clean up soon??
#4
ok ill restart here and try and give some better info
i did a egr delete and oil cooler on my buddies truck got it all back together and it sounded horrible and idled rough and had some white ssmoke coming from under the hood and also had a majior oil leak and looked like it was in the oil valley and going down drivers side onto the exhuast manifold but white smoke was not oil burning off the drivers side manifold and tried taking it down the road the first time i got it running and it barley had any power could only get up to about 30 in 1/2 mile
i did a egr delete and oil cooler on my buddies truck got it all back together and it sounded horrible and idled rough and had some white ssmoke coming from under the hood and also had a majior oil leak and looked like it was in the oil valley and going down drivers side onto the exhuast manifold but white smoke was not oil burning off the drivers side manifold and tried taking it down the road the first time i got it running and it barley had any power could only get up to about 30 in 1/2 mile
#5
Make sure the Map sensor tube is hooked up, it gets forgotten often, it is a rubber tube covered with black plastic wire loom and it goes to the intake manifold just behind the alternator. the Map sensor itself is on the Cowl area right above and to the left of the turbo. it will run like crap without that tube hooked up. oil leak is probably a bad gasket seal at the oil cooler
#7
No that is the heater hose,
6.0 map sensor - Bing Images
see the brass hose barb on the left side of the intake between bolts 3 and 4? that is where the Map sensor hose hooks up
6.0 map sensor - Bing Images
see the brass hose barb on the left side of the intake between bolts 3 and 4? that is where the Map sensor hose hooks up
#9