Perkins 4.236 in 75 Range Rover

JimmymacD · #1 01-10-2010, 02:20 PM

Hi, UK newbie after some advice.
Just bought 1975 Range Rover with a Perkins 4.236 conversion. Came minus ignition, cooling and power steering. All sorted except engine preheat which sits in intake manifold with a fuel pipe. There are no electrics to it. I have tested it and it heats up OK. Does anyone have a wiring diagram or know what relays and wiring I need to create a push button or ignition preheat feed to the manifold?
Cheers, JimmyMac D

dealwithit · #2 01-10-2010, 09:49 PM

well you should be able to just use a push button to a relay then from the relay to the power source, ground, and to the heater.

JimmymacD · #3 01-11-2010, 02:32 AM

Thanks for the info, when you say power source, is that straight from battery or is there enough juice through LT wiring on ignition? I take it that the relay is earthed?
Cheers Jimmymac D

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

LinkBacks (?) LinkBack to this Thread: http://www.dieselbombers.com/diesel-engine-conversions/40349-perkins-4-236-75-range-rover.html
Posted By	For	Type	Date
Custom turbo diesel b2600i 2wd (56k beware) - Page 5 - Mazdatruckin.com Truck Forum and Tech Site	This thread	Refback	05-10-2010 07:42 PM
Custom turbo diesel b2600i 2wd (56k beware) - Mazdatruckin.com Truck Forum and Tech Site	This thread	Refback	03-02-2010 10:23 PM
Custom turbo diesel b2600i 2wd (56k beware) - Page 17 - Mazdatruckin.com Truck Forum and Tech Site	This thread	Refback	02-15-2010 08:00 PM