98 s10 ext cab v2203 700r4 4x4 sas
#1
98 s10 ext cab v2203 700r4 4x4 sas
I have been collecting parts for a while and working on the bell housing adapter I am about ready to start on the truck itself I will try and get some pictures of the bell housing and flexplate adapter up soon
Last edited by spencxr80; 04-04-2016 at 10:36 PM. Reason: Pictures
#3
#4
#8
Looking good! I did a similar setup with the flywheel adapter bolted to the Kubota flywheel in a Cherokee with an AW4 auto. It worked great. Don't forget to bump the timing up and stiffer gov spring while you have it out. It a lot easier now, removing all the shims from under the ip gives it @ 11deg.
#9
Looking good! I did a similar setup with the flywheel adapter bolted to the Kubota flywheel in a Cherokee with an AW4 auto. It worked great. Don't forget to bump the timing up and stiffer gov spring while you have it out. It a lot easier now, removing all the shims from under the ip gives it @ 11deg.