97 12v into 02 f350
#1
97 12v into 02 f350
I got a 02 f350 with the 5.4 gasser and wanna put a 12v with zf6 tranny the motor is rebuilt and needs only a pump. I got a 70mm t3/to turbo for it. $1500 for the motor is a good deal right? Now for the zf6 transfecase can I use the one off the autotranny or do I need a certain one.
The whole point of doing this is to get rid of the gasser for pulling power and better mpg. I want it to be standard because I hate the slush box 4 spd I have in it. Do I need to change any electrical stuff if I swap from auto to standard?
I know I'm forgetting a few things but just want to know if it is worth it
Any implies would be helpful thanks
The whole point of doing this is to get rid of the gasser for pulling power and better mpg. I want it to be standard because I hate the slush box 4 spd I have in it. Do I need to change any electrical stuff if I swap from auto to standard?
I know I'm forgetting a few things but just want to know if it is worth it
Any implies would be helpful thanks
#2
I dont want to tell you thats a bad deal, however I bought mine from a junkyard complete fan-flywheel delivered for $1500 with 60,000 miles (97 215hp). These swaps get very expensive if you have to do it one piece at a time if I were to do it again I would have bought a complete truck for the swap. You will need a pedal setup off a 99 up 250-350 maybe someone else will chime in with the electrical I mostly do older trucks always standard! Also I would go with a nv4500 the zf isnt bad but you will spend more money buying the trans and adapters.
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
12-07-2015 01:09 PM
1ATony
1A Auto Parts
1
10-15-2015 10:58 AM
1ATony
1A Auto Parts
0
09-02-2015 01:03 PM