1st gen 12v p pump conversion questions
#1
#4
#5
You are going to need a pump gear housing from a newer 12 valve you will need injector lines i believe cause they won't thread on they are different threads you will need the bracket that holds the pump it's on the side of the block That's the major stuff
#7
IIRC, and I could be wrong, the injectors' ports were different diameters and thread-pitches. 2nd-gen injectors might not go into a 1st-gen block at all. THAT BEING SAID, (and, IF it's true) you could probably still use 1st-gen injectors, but with new nozzles that duplicate the 2nd-gen spray/delivery/pop-off pressures
Thread
Thread Starter
Forum
Replies
Last Post