Om617 96 Jeep Cherokee build thread
#192
#193
I do not run a lift pump. A lift pump my be beneficial but it would have to be very low pressure.
#195
Tough question. Most of what I've changed from the initial install has been documented here already, most notably the higher stall converter and smoothing out the 1-2 shift. Other than that it has been pretty great. There have been some on here with concerns regarding front oil sump running dry on steep inclines, but I can truly verify this is not an issue. I almost flipped it over backwards on an incline this weekend, kept it running the entire time while waiting for winch rescue with no oil pressure issues. My quest for more better is leading me to try a couple things. #1 try my luck at turning the pump up for more power. #2 install triple radiator fans and a PWM controller. This IDI makes lots of heat. #3 upgrade turbo to a small Holset and intercooler
The following users liked this post:
pastorjeep (09-08-2015)
#197
Holset HX30 or Hx30 . I've read very good things about this turbo, problem is finding one. I know they came on the 4bt.
#199